SOYO BT1B6 motherboard (with a Pentium 233MMX), Intel PIIX4 ATA controller,
Primary master: QUANTUM FIREBALL EX3.2A on 40-conductor cable.

---

PIIX4: load c:ideata /info
Loading module IDEATA.HAM
  Novell ATA/IDE/ATAPI Host Adapter Module
  Version 4.10    July 11, 2003
  Copyright 1989-2003, Novell, Inc.  All rights reserved.
  Auto-loading module NWPALOAD.NLM
  NetWare 3.x/4.X NWPA Load Utility
  Version 1.50    July 22, 1998
  Copyright 1994-1998, Novell, Inc.  All rights reserved.
  Debug symbol information for IDEATA.HAM loaded
    10009: 71008086 with 06:00:00 Command: 0006  BMIBA: 0000
    10010: 71108086 with 06:01:00 Command: 000F  BMIBA: 0000
    10011: 71118086 with 01:01:80 Command: 0005  BMIBA: F001
        1: 8A015333 with 03:00:00 Command: 0007  BMIBA: 0000

Supported SLOT options are: 10011
Select SLOT Option: 10011

  DMA chipset product ID 71118086 (Intel PIIX4) present:
    Slave Timing 44:  33
    Timing Reg 1 40:  A307        UDMA Control 48:  01
    Timing Reg 2 42:  8000        UDMA Timing: 4A:  0002
    Class Code:       Base: 01 Sub: 01 Prog: 80
    Product ID:       8086.7111.0000.0000.01
    Primary:          00000000 00000000  Secondary:  00000000 00000000
    BMIBA:            0000F001    Interrupt Line:   00
    Command:          0005        PCI Status:       0280
    Header:           00          Latency:          40
           Bus 0 (Channel 0) Device 0: 'QUANTUM FIREBALL EX3.2A '
    Config Bits:   045A    Capabilities:  0F00    Validity Bits: 0007
    Multiword DMA: 0007    Ultra DMA:     0407    Cable Type:    0000
    Major Version: 001E    Min DMA Xfer:  0078    Min PIO Xfer:  0078
    Curr Cylind:   1870    Curr Heads:    0010    Curr Sectors:  003F
    Curr Capacity: 00603900           Max Capacity:  0000000000000000
    Feat Support:  4001    Feat Enabled:  0001    (48-bit enabled: No)
    SATA Capabils: 0000    SATA Support:  0000    SATA Enabled:  0000
  80-conductor cable not detected on bus 0 (ch 0) device 0
  DMA level currently set: 42    Capable of: 42    Action: None
     Novell ATA/IDE Fixed Disk Drive Custom Device Module
     NetWare Elevator Filter
     NetWare Sector Conversion Filter
     NetWare Verify Filter
     NetWare Miscellaneous Attributes Filter

PIIX4: load c:ideata /?
Loading module IDEATA.HAM
IDEATA.HAM command line switches (and their current settings):

  /?          Display the command line switches
  /break      Break into the debugger upon loading the driver
  /debug      Display debug information (No)
  /global     Keep a history of all actions performed by the driver (No)
  /history    Keep a history of actions performed on all requests (Yes)
  /info       Display user and technical information (Yes)
  /noaen      Disable AEN support (No)
  /nodma      Disable DMA transfers (No)
  /noint      Disable interrupts for all I/O (No)
  /nomp       Disable the ability to run on multiple processors (No)
  /nonative   Disable the ability to run in Native Mode (No)
  /safe       Safe Mode (same as /nodma /noint /nomp /noaen /history) (No)
  /verbose    Display all actions performed by the driver (No)

  (appending a '-' to any switch will disable the switch, such as /debug- )

  Chipsets:
    ProdID 71118086  HIN: 10011  P0 01F0  C0 03F6  P1 0000  C1 0000  IRQ 0E
      Active devices: 10  DMA devices: 11  Operating mode: 00  Loaded: 81
  Previously loaded module was used re-entrantly